Sekonic FLASHMATE L-308X - Advanced Functions; Custom Setting Function

31
6. Advanced Functions
●
6.
Advanced Functions
6-1 Custom Setting Function
Use these settings to customize meter operations and displays to fit your camera and
metering requirements.
Operation
1.
To enter the custom setting mode, hold
the MODE Button and then press the
POWER Button to turn the meter ON.
‘CS’ (custom setting) and setting number
(1 to 3) will appear at the right of the
display. The current custom setting will
appear at the left side of the display.
2.
Press the UP or DOWN Button to select the desired custom
setting number.
Display mode
（CS1）
Simplified
illuminance display
（CS3）
Increments of aperture
and shutter speed
Press UP Button or DOWN Button
（CS2）
Custom setting group Custom setting item
Display mode
Increments of aperture
and shutter speed
Simplified illuminance
display
Paso de 1/2
No Display
Lux
CINE modeHD_CINE mode
Full Step 1/2 Step
(※1)
PHOTO mode
(※1)
ＣＳ１
ＣＳ２
ＣＳ３
(※2)
CS number
Foot-Candle
(※1)
※1
Default settings.
※2
Simplified illuminance (Lux or Foot-Candle) is not displayed in PHOTO mode.
fc
MODE Button
POWER Button
Custom Setting item
CS No.
UP Button
DOWN Button