27
5. Measurement
●
5-3-3 Simplied Illuminance Mode
Illuminance mode can be selected in Custom setting (
➡
P31).
Operation
1.
Slide the Lumisphere all the way to the right
and attach the Lumidisc (optional accessory)
( ➡ P10).
2.
Press MODE Button to select the Simplified
Illuminance Mode.
3.
Position the Lumidisc in front
of and parallel to the area to be
measured and press MEASURING
Button. Measurements will be taken
continuously and displayed as
illuminance values as long as the
button is pressed. Releasing the
MEASURING Button will hold and
display the last measured value.
Lumidisc
Lumisphere
Measured value (Lux)
Lumidisc
To Next Page
Loading...
