Sekonic FLASHMATE L-308X - Out of Measurement Range; When E.o (Exposure Over) Blinks on the Display; When E.u (Exposure Under) Blinks on the Display

30
5. Measurement
●
5-5-2 Out of Measurement Range
1)
When “E.o” (Exposure over) blinks on the display
If the brightness exceeds the measuring range of the meter, “E.o” will blink to indicate that
measurements cannot be made. In this case, if possible, lower the ash output power or
move away from the light source and take another measurement.
2)
When “E.u” (Exposure under) blinks on the display
If the darkness is beyond the measuring range of the meter, “E.u” will blink to indicate that
measurements cannot be made. In this case, if possible, raise the ash output power or
move closer to the light source and take another measurement.
3.
If possible, raise the output power of light source, and take another
measurement.