5
3. Before Use
●
3-2 Inserting the Batteries
1.
Prepare a single AA battery.
2.
Slide down the battery compartment
cover in the direction of the arrow to
remove.
3.
Insert the battery observing the polarity
with the +, - marks in the battery
compartment.
4.
Align battery compartment cover with
main unit and slide shut.
Make sure that the cover is properly in place and closed.
WARNING
●
Never place batteries in re, short, disassemble, heat or charge them. The
batteries might break down, and cause an accident, injury or pollute the
environment.
CAUTION
●
Use the manganese or alkaline batteries.
●
Please insert the battery minus “-” side first. When removing the battery,
remove them plus “+” side rst.
●
lf the meter will not be used for an extended period of time, it is
recommended to remove the batteries to avoid possible damage caused by
battery leaking.
To Next Page
Loading...
