14
5. Measurement
●
5.
Measurement
5-1 PHOTO Mode
Use this mode to obtain exposure settings when taking single images with adjustable lm
or digital cameras. Measuring Mode choices include Ambient, Cordless Flash and Cord
Flash. When measurements are taken, the meter will indicate the aperture value required
for proper exposure.
Refer to the custom setting to select the PHOTO Mode (
➡
P31).
<Measuring in Ambient Light Mode>
Continuous light like natural light (sunlight) as well as tungsten lamps and fluorescent
lamps are measured in Ambient Light Mode.
Measurements in this mode are made in Shutter Speed Priority Mode, Aperture Priority
Mode and EV Mode. Press MODE Button to select the Ambient Mode.
5-1-1 Shutter Speed Priority Mode
Operation
1.
Press the MODE Button to select the
Shutter Speed Priority Mode.
2.
Hold ISO Button and press UP or
DOWN Button to select the ISO
sensitivity ( ➡ P13).
3.
Press the UP Button or DOWN Button
to set the desired shutter speed.
4.
Press the MEASURING Button to take
a measurement. Measurements will
be taken continuously and displayed
as aperture values as long as the
button is pressed. Releasing the
MEASURING Button will hold and
display the last measured value.
M
O
D
E
MODE Button
UP Button
DOWN Button
ISO Button
1/10 step measured
value (f stop)
Set shutter
speed
Measured
value (f stop)
To Next Page
Loading...
