Sekonic FLASHMATE L-308X - Select Measuring Mode

12
4. Basic Operation
●
4-4 Select Measuring Mode
The following Measuring modes in each Display
Mode
are available.
Press the MODE Button to select the Measuring
Mode
. (
➡
P8)
PHOTO Mode:
•
Shutter Speed Priority Mode (Ambient mode)
•
Aperture Priority Mode (Ambient mode）
•
EV mode (Ambient mode)
•
Cordless Flash Mode
(Shutter Speed Priority)
•
Cord Flash Mode (Shutter Speed Priority)
HD_CINE Mode: (Ambient light only)
•
Shutter Speed Priority Mode
•
Frame Rate Setting Mode
•
Simplied Illuminance Mode (Selectable in Custom setting)
CINE Mode: (Ambient light only)
•
Frame Rate Priority Mode
•
Shutter Angle Setting Mode
•
Simplied Illuminance Mode (Selectable in Custom Setting)
NOTE
● Hold ISO Button and press MODE Button to return to the previous Measuring Mode.
● Ambient light refers to continuous light like natural light (sunlight), tungsten lamps or
uorescent lamps.
● Flash light is a brief, intense burst of light made by electronic ash units or ash bulbs.
M
O
D
E
MODE Button