Sekonic FLASHMATE L-308X - Basic Operation; Basic Measurement Workflow

8
4. Basic Operation
●
4.
Basic Operation
4-1 Basic Measurement Workow
Power ON ( ➡ P6)
Switch the light receiving
method ( ➡ P9)
Incident light ( ➡ P9)
Reflected light
( ➡ P11)
Select the Display mode
(in Custom Setting)
( ➡ P31)
PHOTO Mode
( ➡ P14)
Ambient T Priority Mode ( ➡ P14)
Ambient F Priority Mode ( ➡ P15)
Ambient EV Mode ( ➡ P16)
Cordless Flash Mode ( ➡ P18)
Select the Measuring
Mode
Cord Flash Mode ( ➡ P20)
HD_CINE Mode
( ➡ P22)
Ambient T Priority Mode ( ➡ P22)
Frame Rate Setting ( ➡ P23)
Simplified Illuminance Mode
( ➡ P24)
CINE Mode ( ➡ P25)
Ambient f/s Priority Mode ( ➡ P25)
Shutter Angle Setting ( ➡ P26)
Input setting values
( ➡ See each Measuring
Mode)
Simplified Illuminance Mode
( ➡ P27)
Measure