25
5. Measurement
●
5-3 CINE Mode
Use this mode to obtain exposure settings when using film or digital motion-picture
cameras that record images using frame rate and shutter angle settings.
When measurements are taken, the meter will indicate the aperture value required
for proper exposure. This mode also enables taking Simplified Illuminance readings
(Selectable in Custom setting).
Refer to the custom setting to select CINE Mode (
➡ P31
).
5-3-1 Frame Rate Priority Mode
Operation
1.
Press MODE Button to select
Frame Rate Priority Mode.
2.
Hold ISO Button and press UP or
DOWN Button to select the ISO
sensitivity ( ➡ P13).
3.
Press UP or DOWN Button to set the
desired frame rate.
4.
If necessary, set shutter angle in
Shutter Angle Setting mode (default
setting is 180 degrees. ➡ P26).
5.
Press the MEASURING Button to
take a measurement. Measurements
will be taken continuously and
displayed as aperture values as long
as the button is pressed. Releasing
the MEASURING Button will hold
and display the last measured value.
M
O
D
E
MODE Button
ISO Button
UP Button
DOWN Button
1/10 step measured
value (f stop)
Set frame rate
Measured
value (f stop)
To Next Page
Loading...
