22
5. Measurement
●
5-2 HD_CINE Mode
Use this mode to obtain exposure settings when using DSLR and digital video cameras
that record images using frame rate and shutter speed settings. When measurements are
taken, the meter will indicate the aperture value required for proper exposure.
This mode also enables taking Simplified Illuminance readings (Selectable in Custom
setting).
Refer to the custom setting to select the HD_CINE Mode (
➡ P31
).
5-2-1 Shutter Speed Priority Mode
Operation
1.
Press MODE Button to select the
Shutter Speed Priority Mode.
2.
Hold ISO Button and press UP or
DOWN Button to select the ISO
sensitivity ( ➡ P13).
3.
Press the UP or DOWN Button to
set the desired shutter speed.
4.
If necessary, set the frame rate in
Frame Rate Setting Mode (Default
setting is 24fps. ➡ P23).
5.
Press the MEASURING Button
to take a measurement.
Measurements will be taken
continuously and displayed as
aperture values as long as the
button is pressed. Releasing the
MEASURING Button will hold and
display the last measured value.
M
O
D
E
MODE Button
UP Button
DOWN Button
ISO Button
1/10 step measured
value (f stop)
Set shutter
speed
Measured
value (f stop)
To Next Page
Loading...
