21
5. Measurement
●
NOTICE
● The electronic ash unit may trigger when you connect the synchro cord or operate the
POWER Button.
● A cord-connected ash may not re if the ash unit has an extremely low trigger voltage.
If this happens, use the Cordless Flash Mode (
➡
P18).
NOTE
● The setting of shutter speed is same as "Cordless Flash Mode" (
➡
P18).
● If the ISO setting is changed after measuring, the displayed aperture value will be
automatically adjusted for the proper exposure.
● If “E.o” (over) or “E.u” (under) appears and blinks, the measurement cannot be made at
the selected settings (
➡
P29).
WARNING
●
To avoid a danger of choking, please place Synchro terminal cap in
a
location where an infant cannot reach and accidentally swallow it.
There is a danger of suffocation.
CAUTION
●
There is a danger of electric shock if the meter is handled with wet hands,
during rain, in areas splashed by water or where there is a lot of moisture.
This may also result in damage to the meter.
To Next Page
Loading...
