30K Motorcycle Bluetooth Communication System with Mesh Intercom™
| 11
MENU
2. INSTALLING THE
HEADSET ON YOUR
HELMET
Helmet
Installation
Using the
Glued Surface
Mounting
Adapter
Switching the
Microphone
Earbuds
External
Mesh
Intercom
Antenna
2. Place the helmet speakers along with the hook
and loop fasteners, centered to your ear, in the
ear pockets of the helmet. If the helmet has deep
ear pockets, you can use the speaker pads to
place the speakers closer to your ears.
Note:
• The speaker with the shorter wire is for the left
ear and the speaker with the longer one is for
the right ear.
• Make sure that the microphone is located
properly close to your mouth when you
wear the helmet. Adjust the direction of
the microphone so that the fin side of the
microphone is facing outward, away from your
lips.
Fin
To Next Page
Loading...
