Sena 30K-03 - Pairing When the 30 K Is Turned off

30K Motorcycle Bluetooth Communication System with Mesh Intercom™ | 25
MENU
4. PAIRING THE
HEADSET WITH
OTHER BLUETOOTH
DEVICES
Phone Pairing
Second
Mobile Phone
Pairing
Advanced
Selective
Pairing:
Hands-Free or
A2DP Stereo
GPS Pairing
2. Select 30K in the list of
Bluetooth devices detected.
If your mobile phone asks
for a PIN, enter 0000.
Device B
Pi
Bluetooth
30K
Note:
• The phone pairing mode lasts for
3 minutes.
• To cancel phone pairing, tap the Phone
Button or the Jog Dial.
4.1.2 Pairing When the 30K is Turned Off
1. While the headset is off, press and hold the
Phone Button and the Jog Dial until the
LED flashes red and blue alternately and
you hear a voice prompt, “Phone pairing.”
=
P
HOLD
Blinking
“Phone pairing”
2. Select 30K in the list of
Bluetooth devices detected.
If your mobile phone asks
for a PIN, enter 0000.
Device B
Pi
Bluetooth
30K