Sena 30K-03 - Headset Language; Mesh Reach-Out (Default: Disable); Audio Equalizer (Default: Off); VOX Phone (Default: Enable)

30K Motorcycle Bluetooth Communication System with Mesh Intercom™ | 75
MENU
12. CONFIGURATION
Headset
Configuration
Setting
Software
Configuration
Setting
12.2.1 Headset Language
You can select the device language. The
selected language is maintained even when
the headset is rebooted.
12.2.2 Mesh Reach-Out (Default: Disable)
When the Mesh Reach-Out is enabled, a
Mesh Reach-Out request message can be
sent or received. If the Mesh Reach-Out is
disabled, a Mesh Reach-Out request message
cannot be sent or received.
12.2.3 Audio Equalizer (Default: Off)
Increase or decrease the decibel level of
different frequency ranges of audio.
• Balance will adjust all of the frequency
ranges to be the same volume level (0 dB).
• Bass Boost will increase the bass range of
audio (20 Hz - 250 Hz).
• Mid Boost will increase the mid range of
audio (250 Hz - 4 kHz).
• Treble Boost will increase the high range of
audio (4 kHz - 20 kHz).
12.2.4 VOX Phone (Default: Enable)
If this feature is enabled, you can answer
incoming calls by voice. When you hear a
ringtone for an incoming call, you can answer
the phone by saying a word such as “Hello”
loudly or by blowing air into the microphone.
VOX Phone is temporarily disabled if you
are connected to intercom. If this feature is
disabled, you have to tap the Jog Dial or the
Phone Button to answer an incoming call.