Sena 30K-03 - Intercom-Audio Overlay Sensitivity (Default: 3); Audio Overlay Volume Management (Default: Disable); HD Intercom (Default: Enable)

30K Motorcycle Bluetooth Communication System with Mesh Intercom™ | 78
MENU
12. CONFIGURATION
Headset
Configuration
Setting
Software
Configuration
Setting
12.2.8 Intercom-Audio Overlay Sensitivity
(Default: 3)
The music and GPS volume will be lowered
to play in the background if you talk over the
intercom while the overlaid audio is playing.
You can adjust the intercom sensitivity to
activate this background audio mode. Level 1
has the lowest sensitivity and level 5 has the
highest sensitivity.
Note: If your voice is not louder than the
sensitivity of the selected level, the overlaid
audio will not be lowered.
12.2.9 Audio Overlay Volume Management
(Default: Disable)
The music and GPS overlaid audio reduces
in volume whenever there is an ongoing
intercom conversation. If Audio Overlay
Volume Management is enabled, the volume
level of the overlaid audio will not be reduced
during an intercom conversation.
12.2.10 HD Intercom (Default: Enable)
HD Intercom enhances the two-way intercom
audio from normal quality to HD quality. HD
Intercom will become temporarily disabled
when you enter into a multi-way intercom. If
this feature is disabled, the two-way intercom
audio will change to normal quality.
Note:
• The intercom distance of HD Intercom
is relatively shorter than that of normal
intercom.
• HD Intercom will become disabled
temporarily when Bluetooth Intercom
Audio Multitasking is enabled.