Sena 30K-03 - VOX Intercom (Default: Disable); VOX Sensitivity (Default: 3)

30K Motorcycle Bluetooth Communication System with Mesh Intercom™ | 76
MENU
12. CONFIGURATION
Headset
Configuration
Setting
Software
Configuration
Setting
12.2.5 VOX Intercom (Default: Disable)
If VOX Intercom is enabled, you can
initiate an intercom conversation with the
last connected intercom friend by voice.
When you want to start intercom, say a
word such as “Hello” loudly or blow air into
the microphone. If you start an intercom
conversation by voice, the intercom
terminates automatically when you and your
intercom friend remain silent for 20 seconds.
However, if you manually start an intercom
conversation by tapping the Jog Dial, you
have to terminate the intercom conversation
manually. However, if you start the intercom by
voice and end it manually by tapping the Jog
Dial, you will not be able to start intercom
by voice temporarily. In this case, you have
to tap the Jog Dial to restart the intercom.
This is to prevent repeated unintentional
intercom connections by strong wind noise.
After rebooting the headset, you can start the
intercom by voice again.
12.2.6 VOX Sensitivity (Default: 3)
Vox Sensitivity can adjust the sensitivity of
Vox Phone and Vox Intercom. Level 5 is the
highest sensitivity setting and level 1 is the
lowest.