30K Motorcycle Bluetooth Communication System with Mesh Intercom™
| 79
MENU
12. CONFIGURATION
Headset
Configuration
Setting
Software
Configuration
Setting
12.2.11 HD Voice (Default: Enable)
HD Voice allows you to communicate in
high-definition during phone calls. This
feature increases the quality so that the audio
will be crisp and clear during phone call
conversations.
If this feature is enabled, incoming phone
calls will interrupt intercom conversations
and audio from the SR10 will not be heard
during intercom conversations. Three-
Way Conference Phone Call with Intercom
Participant will not be available if HD Voice is
enabled.
Note:
• Refer to the manufacturer of your
Bluetooth device that will be connected
to the headset to see if it supports HD
Voice.
• HD Voice is active only when Bluetooth
Intercom Audio Multitasking is
disabled.
12.2.12 Smart Volume Control
(Default: Disable)
Enabling Smart Volume Control
automatically changes the level of the speaker
volume based on the level of the environment
noise. You can enable it by setting the
sensitivity to low, medium or high.
To Next Page
Loading...
