30K Motorcycle Bluetooth Communication System with Mesh Intercom™
| 14
MENU
2. INSTALLING THE
HEADSET ON YOUR
HELMET
Helmet
Installation
Using the
Glued Surface
Mounting
Adapter
Switching the
Microphone
Earbuds
External
Mesh
Intercom
Antenna
5. Reconnect the speaker cable to the speaker port.
1
2
6. Locate a proper surface on the helmet to attach
the unit then clean the helmet surface location
with a moistened towel and allow it to dry
thoroughly.
7. Peel off the cover of the adhesive tape of the
adapter and attach the unit on the proper surface
of your helmet.
To Next Page
Loading...
