12
Tufftalk Lite
4.1 Mobile Phone Pairing - Mobile Phone, Bluetooth
Stereo Device
1. To enter the voice conguration menu, press and hold the
Center Button for 10 seconds until you hear the voice prompt,
“Conguration menu”.
2. By tapping the (+) Button, you will hear the voice prompt, “Phone
pairing”.
3. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.
4. The mobile phone conrms that pairing has been completed and
the Tufftalk Lite is ready to use. You will hear a voice prompt,
“Your headset is paired”.
5. If the pairing process is not completed within three minutes, the
Tufftalk Lite will return to stand-by mode.
Note:
• If the Bluetooth connection between the headset and a mobile phone is
disconnected, press the Center Button for 3 seconds until you hear a
high-toned single beep to recover the Bluetooth connection immediately.
• If the Bluetooth connection between the headset and a media player is
disconnected, press the Center Button for 1 second to recover the
Bluetooth connection and play.
4.2 Second Mobile Phone Pairing - Second Mobile
Phone and SR10
Typical Bluetooth headsets can connect with only one Bluetooth
device, but a second mobile phone pairing allows the headset to
connect with another Bluetooth device such as a second mobile
phone, an MP3 Player, or the Sena SR10, the Bluetooth adapter.
1. To enter the voice conguration menu, press and hold the
Center Button for 10 seconds until you hear the voice prompt,
“Conguration menu”.
2. Tap the (+) Button until you hear a voice prompt, “Second mobile
phone pairing”.
3. Search for Bluetooth devices on your mobile phone. Select the
Sena Tufftalk Lite in the list of the devices detected on the mobile
phone.
4. Enter 0000 for the PIN. Some mobile phones may not ask for the
PIN.
5. The mobile phone conrms that the pairing has completed and
the Tufftalk Lite is ready to use. You will hear a voice prompt,
“Your headset is paired”.
To Next Page
Loading...
