38
Tufftalk Lite
16.3 Fault Reset
When the Tufftalk Lite is not working properly or is in faulty status for
any reason, you may reset by pushing the pin-hole reset button located
below the Center Button. Separate the left ear cup and insert a paper
clip into the reset pin-hole and press the reset button for a second with
light pressure. The Tufftalk Lite will be switched off. Restart the system
and try again. This will not restore the headset to factory default
settings.
16.4 Factory Reset
If you want to restore the headset to factory default settings, use the
Factory Reset in the conguration menu. The headset automatically
restores the default settings and turns off. Please refer to
section 13.7,
“Factory Reset”
for more details.
To Next Page
Loading...
