EasyManua.ls Logo

Sena Tufftalk Lite - Firmware Upgrade; Troubleshooting; Intercom Failure; Intercom Reconnection

Sena Tufftalk Lite
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
English
Tufftalk Lite
15 FIRMWARE UPGRADE
The Tufftalk Lite supports rmware upgrades. You can update the
rmware using the Sena Device Manager. Please visit Sena Industrial
website at www.senaindustrial.com to check the latest software
downloads.
16 TROUBLESHOOTING
16.1 Intercom Failure
When you try to start an intercom conversation with an intercom friend
who is unavailable within range or already having a conference
intercom with others or a mobile phone call, you will hear low-toned
double beeps signifying an intercom busy signal. In this case, you
have to try again later.
16.2 Intercom Reconnection
If your intercom friend goes out of range while having an intercom
conversation, you may hear static noise and eventually the intercom
will be disconnected. In this case, the Tufftalk Lite automatically tries
to reconnect the intercom every 8 seconds and you will hear high-
toned double beeps until the intercom is reestablished. If you do not
want to make a reconnection, tap the Center Button to stop the
attempt.

Table of Contents

Other manuals for Sena Tufftalk Lite

Related product manuals