32
Tufftalk Lite
13.1 Mobile Phone Pairing
Voice Prompt
“Phone pairing”
Factory Default N/A
To go into mobile phone pairing mode, tap the (+) Button or the (-)
Button until you hear the voice prompt, “Phone pairing”. Please refer
to
section 4.1, “Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo
Device”
for details on mobile phone pairing. If you tap the (+) Button
or the (-) Button, you can exit from the phone pairing mode.
13.2 Second Mobile Phone Pairing
Voice Prompt
“Second mobile
phone pairing”
Factory Default N/A
To go into second mobile phone pairing mode, tap the (+) Button or
the (-) Button until you hear the voice prompt, “Second mobile phone
pairing”. Please refer to
section 4.2, “Second Mobile Phone Pairing -
Second Mobile Phone and SR10”
for details on second mobile phone
pairing. If you tap the (+) Button or the (-) Button, you can exit from the
second mobile phone pairing mode.
13.3 Phone selective pairing
Voice Prompt
“Phone selective pairing”
Factory Default N/A
To go into phone selective pairing mode, tap the (+) Button or the (-)
Button until you hear the voice prompt, “Phone selective pairing”.
Please refer to
section 4.3.2, “HFP for Phone Call Only”
for details on
phone selective pairing. If you tap the (+) Button or the (-) Button, you
can exit from the phone selective pairing mode.
13.4 Media Selective Pairing
Voice Prompt
“Media selective pairing”
Factory Default N/A
To go into media selective pairing mode, tap the (+) Button or the (-)
Button until you hear the voice prompt, “Media selective pairing”.
Please refer
section 4.3.1, “A2DP Stereo Music Only”
for details on
media selective pairing. If you tap the (+) Button or the (-) Button, you
can exit from the media selective pairing mode.
To Next Page
Loading...
