Sena Tufftalk Lite - Two-way Universal Intercom; Three-way Universal Intercom

24
Tufftalk Lite
9.2 Two-way Universal Intercom
You can initiate the Universal Intercom connection with non-Sena
Bluetooth headsets using the same intercom connection method as
you would between other Sena headsets. You may single tap the
Center Button to begin an intercom conversation with the rst intercom
friend, double tap with the second intercom friend, and triple tap with
the third intercom friend.
Non-Sena Bluetooth headsets may initiate the Universal Intercom
connection, by activating the voice dialer or using the redialing
operation. You may also disconnect the existing connection by using
the operation to end a call (refer to
the User’s Guide of the headsets
for voice dialer, redialing, and ending a call).
9.3 Three-way Universal Intercom
You may make a three-way Universal Intercom connection with two
Tufftalk Lite headsets and one non-Sena Bluetooth headset. If the
intercom connection is made, all headsets connected cannot use the
mobile phone call function since the connection between the headset
and the phone is disconnected temporarily. If you disconnect the
intercom call, the mobile phone connection is made again automatically
so that you can use a mobile phone call function.
1. You (A) need to be paired with a non-Sena Bluetooth headset (B)
and another Tufftalk Lite headset (C) for the three-way conference
intercom.
(A)
(B) (C)
Pairing
Pairing