EasyManua.ls Logo

Sena Tufftalk Lite - Mobile Phone; Mobile Phone Call Making and Answering

Sena Tufftalk Lite
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
English
Tufftalk Lite
4. You can make other pairing between headsets A and C, and
between headsets A and D by following the same procedure as
above.
5. The intercom pairing queue is ‘Last-Come, First-Served ’. If a
headset has multiple paired headsets for intercom conversations,
the last paired headset is set as rst intercom friend. The
previous intercom friend becomes second intercom friend, and
third intercom friend.
Note:
For example, after the pairing procedures listed above, headset D is the
rst intercom friend of headset A. Headset C is the second intercom
friend of headset A, and headset B is the third intercom friend of headset
A.
5 MOBILE PHONE
5.1 Mobile Phone Call Making and Answering
1. When you have an incoming call, simply tap the Center Button to
answer the call.
2. You can also answer the incoming call by loudly speaking any
word of your choice if Voice Activated Phone Answering (VOX
Phone) is enabled, unless you are connected to intercom.
3. To end a call, press the Center Button for 2 seconds, or wait for
the called person to end the call.
4. To reject a call, press the Center Button for 2 seconds while the
phone is ringing.
5. There are several ways to make a phone call:
Enter numbers on your mobile phone’s keypad and make a call.
Then the call is automatically transferred to the headset.
In stand-by mode, press the Center Button for 3 seconds, to
activate the voice dialing of your mobile phone. For this, the
voice dialing function must be available on the mobile phone.
Refer to your mobile phone manual for further instruction.

Table of Contents

Other manuals for Sena Tufftalk Lite

Related product manuals