Sena Tufftalk Lite - Advanced Selective Pairing - A2 DP Stereo or Handsfree

13
English
Tufftalk Lite
Note:
• If you have two audio (A2DP) devices connected to your headset then
the audio from one device will interrupt the audio from the other device.
For example, if you are playing music from the primary mobile phone,
then it can be interrupted by playing music from the secondary mobile
phone and vice versa.
• The Sena SR10 is a Bluetooth two-way radio adapter for group
communication, and uses Hands-Free Profile. The incoming audio from
the two-way radio via SR10 is heard in the background while having an
intercom conversation or a mobile phone call.
4.3 Advanced Selective Pairing - A2DP Stereo or
Handsfree
When you are using a smartphone, sometimes you may need to
selectively use the Tufftalk Lite for A2DP stereo music only or for
mobile phone handsfree only. These instructions are for advanced
users who want to pair the Tufftalk Lite to their smartphones with only
one selective prole: A2DP for stereo music of HFP for phone calls.
If you have previously paired a mobile phone to the Tufftalk Lite, you
must clear the previous pairing list on both devices: the mobile phone
and the Tufftalk Lite. To clear the pairing list on the Tufftalk Lite, please
do a factory reset or following the pairing list clearing procedure
described in
section 13.7, “Factory Reset” or 13.5, “Delete All
Bluetooth Pairing Information” . To clear the pairing list on the mobile
phone, please refer to the mobile phone manual . For most smartphones,
delete the Sena Tufftalk Lite from the list of Bluetooth devices in the
settings menu.