Sena Tufftalk Lite - Delete All Bluetooth Pairing Information; Universal Intercom Pairing; Factory Reset; Exit Voice Configuration Menu

33
English
Tufftalk Lite
13.7 Factory Reset
Voice Prompt
“Factory reset”
Factory Default N/A
Execute Tap the Center Button
To restore factory default settings on the Tufftalk Lite, tap the (+) Button
or the (-) Button until you hear a voice prompt, “Factory reset”, and
tap the Center Button to conrm. The Tufftalk Lite powers off with a
voice prompt, “Headset reset, goodbye”.
13.8 Exit Voice Conguration Menu
Voice Prompt
“Exit conguration”
Factory Default N/A
Execute Tap the Center Button
To exit voice conguration menu and get back to stand-by mode, tap
the (+) Button or the (-) Button until you hear a voice prompt, “Exit
conguration”, and tap the Center Button to conrm.
13.5 Delete All Bluetooth Pairing Information
Voice Prompt
“Delete all pairings”
Factory Default N/A
Disable Tap the Center Button
To delete all Bluetooth pairing information of the Tufftalk Lite, tap the
(+) Button or the (-) Button until you hear a voice prompt, “Delete all
pairings”, and tap the Center Button to conrm.
13.6 Universal Intercom Pairing
Voice Prompt
“Universal intercom pairing”
Factory Default N/A
Execute Tap the Center Button
To enter into Universal Intercom Pairing mode, tap the (+) Button or the
(-) Button until you hear a voice prompt, “Universal intercom pairing”.
Then tap the Center Button to enter into Universal Intercom Pairing
mode. The headset will automatically exit from the conguration menu.