Sencore MRD 2600 User Manual

MRD 5800 – User Manual
Page 100 (116)
PSU Max Power:
150W
Current Draw:
Base Unit with no option cards –
38-40W
Base Unit with active ASI input –
54-55W
MPEG/IP option card with active input –
2-3W (additional)
DVB-S/S2 option card with active input and LNB load of
19V @ 500mA –
8-9W (additional)
DVB-CI Module option with 2 CAM Modules installed –
2-3W (additional)
8VSB/QAM option card with active input –
2-3W (additional)
Max Power Draw:
70-72W
Frequency:
50/60Hz
Connector:
IEC C14
Line Cord:
Detachable, 3-prong
Redundancy:
Load Sharing
DC Power –
Operating Voltage:
36-72V DC
PSU Max Power:
200W
Current Draw:
Base Unit with no option cards –
38-40W
Base Unit with active ASI input –
54-55W
MPEG/IP option card with active input –
2-3W (additional)
DVB-S/S2 option card with active input and LNB load of
19V @ 500mA –
8-9W (additional)
DVB-CI Module option with 2 CAM Modules installed –
2-3W (additional)
8VSB/QAM option card with active input –
2-3W (additional)
Max Power Draw:
70-72W
Connector:
2 pin terminal block
Genlock Interface (MRD 58701) Adds –
Genlock Connector:
75Ω Female BNC
Input Impedance:
10kΩ
Return Loss:
≥20 dB, 0Mhz to 8 Mhz

Sencore MRD 2600 Specifications

General

Brand	Sencore
Model	MRD 2600
Category	Receiver
Language	English