MRD 5800 – User Manual
Page 12 (116)
2. Relay Output Connector
3. External Genlock Reference Input (Factory Option)
4. Eight Digital Audio Outputs
5. Two 15-Pin Analog Audio Connectors
6. Composite Video Output
7. Two 3G/HD/SD-SDI Output Connectors (mirrored)
8. Digital Video Output Connector
9. ASI I/O Connectors
10. Option Card Slot #1 (factory installed)
11. Option Card Slot #2 (factory Installed)
12. Chassis ground
13. Optional Dual Power Supply
14. Optional Simultaneous SD Video Card (factory installed)
1.4 Cooling
The MRD 5800 is cooled via forced induction through the front of the unit and
exhausted through the vents in the rear of the chassis. The MRD 5800 is equipped
with a temperature controlled status indicator. If the temperature inside the unit
exceeds 60°C the red “Error” text will illuminate on the front panel and a description
of the error will appear in the “Error List.”
1.5 Rack Information
The MRD 5800 is intended to be mounted in a standard 19” rack. It occupies 1RU of
rack space and the connections are all on the rear of the unit.
To Next Page
Loading...
Need help?
General
