Sencore MRD 2600 User Manual

MRD 5800 – User Manual
Page 99 (116)
Appendix C – Specifications
MRD 5800 – Base Unit
Includes –
Display, keypad, embedded controller, chassis/case,
power supply/line cord
System –
Display Type:
LCD
Display Configuration:
240 pixels by 64 pixels
Keypad:
Snap-dome Membrane
Front Panel Lockout:
Password control, up to 8 alpha-numeric characters (no
punctuations or spaces allows)
Configurations Allows:
Single video decoder with up to two option cards
Rear Panel:
Fixed inputs and outputs with two option card slots.
Option cards not field upgradeable.
Remote Operation/Update Interface –
Type:
Ethernet, 10/100
Rear Panels indicators:
Link (Green LED), Activity (Amber LED)
Connector:
RJ45
Front Panel Indicators –
Error LED:
Red indicates error is occurring
Off indicates no errors detected
INPUT LED:
Green indicates valid input is present
Off indicates no valid input
Monitor and Control Interfaces –
Web server GUI:
HTTP via web browsing for control & monitoring
Front Panel:
Control & monitoring
SNMP:
Control & monitoring
Operating Altitudes
0 to 10000 feet
AC Power –
Operating Voltage:
100-240VAC
PSU Max Power:
150W
Current Draw:
Base Unit with no option cards –
38-40W
Base Unit with active ASI input –
54-55W
MPEG/IP option card with active input –
2-3W (additional)
DVB-S/S2 option card with active input and LNB load of
19V @ 500mA –
8-9W (additional)
DVB-CI Module option with 2 CAM Modules installed –
2-3W (additional)
8VSB/QAM option card with active input –
2-3W (additional)
Max Power Draw:
70-72W
Frequency:
48-63Hz
Connector:
IEC C14
Line Cord:
Detachable, 3-prong
Dual Redundant AC Power Option–
Operating Voltage:
100-240VAC

Sencore MRD 2600 Specifications

General

Brand	Sencore
Model	MRD 2600
Category	Receiver
Language	English