Sencore MRD 2600 User Manual

MRD 5800 – User Manual
Page 77 (116)
Rename Profile
Select a profile from the drop down menu and click
this button. The user will be prompted for a new
name for the profile.
Delete Profile
Select a profile from the drop down menu and click
this button. The user will be prompted to confirm
deletion of the profile.
Download Profile
Select a profile from the drop down menu and click
this button. The user will be prompted to select a
directory to download the profile.
4.3.3 General Settings
The MRD 5800 can be assigned an alias which is displayed in the upper right hand
corner of the web interface. The alias can help define which MRD 5800 the operator is
currently logged into. The BISS-E Injected ID for BISS Mode E can also be protected
from being accidently changed. Setting the Protect BISS-E Injected ID to Yes will force
the user to unlock the dialog box in the BISS Descrambling configuration menu before
allowing any changes to be made. The edit the Unit Alias or protect the BISS-E Injected I
D click on the button. The Relay Power Cycle Behavior
dropdown allows the user to configure the relays to change state on power cyle or
remain in the same state on power cycle.
4.3.4 Unit Network Configuration
The management port of the MRD 5800 can be configured from the web interface. To
make changes to the management port click, the button under the Unit Network
Configuration section.
If the MRD 5800 contains a 58127 option card the unit can be configured to have an
optional 2
nd
control port.

Sencore MRD 2600 Specifications

General

Brand	Sencore
Model	MRD 2600
Category	Receiver
Language	English