Sencore MRD 2600 User Manual

MRD 5800 – User Manual
Page 83 (116)
the button. The screen below will appear where the files can be downloaded
and saved off of the unit.
4.3.9 Syslog
The MRD 5800 can be configured to send error and event logs formatted in the syslog
protocol to a remote user specified Syslog server.
Action
Range
Description
State
Enabled
Disabled
Enable or Disable sending messages to Syslog
server.
Network Protocol
UDP
TCP
Select which network protocol used to transmit to
the Syslog server
IP Address
Four decimal octets:
XXX.XXX.XXX.XXX
IP of the Syslog server. 0.0.0.0 and
255.255.255.255 are not permitted
Port
0 - 65535
Destination port of the Syslog server

Sencore MRD 2600 Specifications

General

Brand	Sencore
Model	MRD 2600
Category	Receiver
Language	English