Sencore S8100 User Manual

Dear customer:
Thank you for purchasing the Sencore S8100 from our company.
Over the years our company has searched for a solution to the common problems encountered by contractors with their
hand-held concrete saws, after years of talking with contractors we found the most common problems with the saws in
the market today are the following:
• Improper fuel mixture in 2-Cycle Engines
 •ManualChokecausingoodingandinabilitytostartmotor
 •Difcultyintensioningbelt
• Lack of durability- poor build quality
• Weight of the tool itself
• Under powered saws that cannot complete the cut quickly and at the correct RPM.
 •Ineffectiveairltrationandcloggedairlters
• Poor weight distribution of the saw (balance)
• Pull start systems that constantly break
Thesewerejustsomeofthecomplaintsthatweheard,andweknewifwecouldndawaytoaddresstheseconcerns
we would have the best saw on the market today.
After years of searching and testing handheld saws we found a manufacturer that could make the saw that the market
was asking for. Our manufacturer, located in Germany, has 75 years of experience manufacturing 2-cycle engines for
the construction and agricultural markets. Their engineers were able to address all of the problems listed above and
even some that were not mentioned.
Thats how the Sencore S8100 was born!
• AutoLube
TM
technology lets the saw determine how much oil needs to go into the cylinder for
optimum lubrication and maximum saw life
• Electronic choke determines the fuel air mixture needed to start at any temperature
• External screw for belt tensioning
• Highest quality parts used both inside the engine and out.
• 81 Cubic Centimeter engine for the highest power to weight ratio on the market.
 •Patentedtwinpipeairltrationsystemandexternalrockerswitchtocleanairlterwithoutopening  
 lterbox
• Longer handle design to increase ergonomics and better balance the saw for all-day comfort of use.
• Re-designed pull start with more durable internal parts and higher quality nylon cord
In addition to better design features we also kept operator safety in mind by adding:
• One-touch stop button
• Throttle control lock
• Electronic speed limiter
• Wheel guard for the cut off wheel
• Motor stop facility for maintenance purposes
We know that once you use our Sencore S8100 saw you will see for yourself that it is by far the best handheld cut-off
saw on the market today.
Instruction manual for the Sencore S8100 AutoLube
TM
Beforerstusingthistool,readtheseoperatinginstructionsthoroughlyandalwaysobserveallsafetyprovisionsand
instructions. If you have any further questions after reading these operating instructions, contact us directly at
888-313-0004.
Observe the maintenance guidelines closely to ensure the long service life of your equipment.

Sencore S8100 Specifications

General

Brand	Sencore
Model	S8100
Category	Saw
Language	English