Sencore S8100 User Manual

3.4 When Fueling Up
3.5 In Transport
Gasolineishighlyammable.Keepawayfromopenameanddonotspillfuel.Donotsmokeattheworkplaceoratthe
site of fueling!
• Always switch off the engine before fueling.
• Fire hazard! Never refuel while the engine is still hot!
• Always carefully open the tank cap so that any overpressure present can reduce slowly and no fuel will splash out.
•
Prevent skin and eye contact with fuel and other mineral oil products by wearing protective clothing, eye and face
protection. In case of eye contact, rinse at once with lots of clear water. In case of persistent irritation, see a
doctor immediately!
• Regularly change and clean protective clothes.
• Avoid breathing in fuel vapor.
• The refueling site should be well ventilated.
• Avoid any soil spillage of fuel or oil (protection of the environment). Use a suitable mat.
• Immediately clean any fuel spilled on the power tool. Change contaminated clothing without delay.
•
Alwaystightenthefueltankcaprmlybyhandwithoutusinganytools.Tankcapsareequippedwithan  
overturning protection and must be turned closed until a clear “Clicking”. The fuel tank cap must not be able to work
itself loose as a result of the vibrations of the engine.
• Danger to life from burns! Observe leaks. Do not start up and work when fuel is escaping.
• Fuels and oil must only be stored in properly and correctly labeled containers.
•
Before carrying the power tool (even across short distances from one working area to the next), always turn off the
engine and wait until the cut off wheel has stopped. Carry the power tool by the top handle and have the cut off
wheel point backwards.
•
Dangerofburns!Donottouchthehotmufer.
• Never carry or transport the power tool with the cut off wheel running.
•
To avoid spilling of fuel and oil and to prevent damage, the power tool must be secured against tipping
when transporting it in vehicles. Check the tanks for fuel and oil for tightness.
Recommendation: Empty the tanks before transport.
• Empty the tanks before shipping.
• Remove cut off wheel before shipping.
Recommendation: Keep the original packaging in order to protect the equipment against transport damage in case you
ever need to ship it or transport it.
3.6 During Assembly, Cleaning, Maintenance, And Repair
• Thepowertoolmustnotbeassembled,maintained,repairedorstoredinthevicinityofopenames.
• Before assembly, cleaning, maintenance and repair, always turn off the engine; the stop dial must be set to "0" and
the cut off wheel must have stopped. Only the idle speed setting must be performed with the engine running.
• Wear protective gloves for any work.
•
he power tool requires regular maintenance. Only perform such maintenance and repair work on your own that
are described in these operating instructions and that you consider yourself skilled at performing. Any other work
must only be performed by specialist workshops authorized by us.
•
Dangerofburns!Donottouchthemuferwhileitisstillhot–notevenformaintenanceortocheckitfortightt.
• Only perform repairs with original spare parts.
• Danger of accident and injury! Never modify the power tool, as this may impair safety!
SENCORE S8100 CUT-OFF SAW MANUAL 9

Sencore S8100 Specifications

General

Brand	Sencore
Model	S8100
Category	Saw
Language	English