Sencore S8100 - Spark Plugs Check and Replacement if Required

Thene-meshcover(f)andtheairlter(g)mustnotbecleanedwetorwithcompressedair.
Dangerofenginedamagefrominsufcientltereffect!
Replacedamagedltermaterialatonce!
The cut off wheel must not rotate when idling!
The idle position must be inspected every time when taking up work and corrected if required.
•Takeairlterbytheairlterframe(e)andremoveupwards.
•Simplecontactorbrushoutoftheindividualpaperlayers(g)isbesttocleantheairlter.
•Takepowertoolwithbothhandstoemptytheairlterbox(h).
•De-dustne-meshedcover(f)nexttotheairlterboxwithadrybrush.
•Insertairlteragain.
• Install housing parts again.
8.5 Spark Plug Check and Replacement if Required
Danger of contamination for the power tool inside!
Only open the guard in a clean environment.
The spark plug must be inspected regularly every 50 operating hours.
f
e
g
h
a
b
5
d
c
e
30 SENCORE S8100 CUT-OFF SAW MANUAL