These operating instructions are an integral part of the motor device.
Theycontainimportantinformationandinstructionsforhandlingthemotordevice.Alwaysfollowanyspeciedsafety
regulations and instructions, as they are a prerequisite for ensuring that you are working safely with the equipment.
These operating instructions must be kept available at the place of use of the equipment at all times, and they must be
read carefully by everyone who works on or with the equipment (including for maintenance, care and repairs).
These operating instructions must only be used as operating instructions for the motor device S8100.
Any utilization of the contents (text and graphics illustrations)
– even in excerpts – without our prior written consent
shall be forbidden and may be prosecuted.
Text highlights
Xxxxx
Underlined text marks interim headlines.
Xxxxx Text in italics marks advice and notes that facilitate use of the motor device for the user.
1 Xxxxx Numbered text with a black background marks main chapter headlines.
1.1 Xxxx Numbered text with a grey background marks main subchapter headlines.
Xxxxxxx Frames mark especially highlighted sections.
Structure
The operating instructions are structured by numbered main and subchapters. The table of contents on page
3 shows
an overview of the structure.
Header
Tomakeiteasierfortheusertondthechapters,theheadernamesthemainchaptertowhichthecontentonthere-
spective page belongs.
Pictures and diagrams
Some graphical illustrations in these operating instructions are schematic illustrations or principle illustrations and may
not show exactly your device model. The conveyed contents, however, are binding in any case.
Important: If one or several icons in these operating instructions are centered and directly below a chapter header
the notice applies for the entire chapter.
2 Warning, instructions, and notice icons
1.1 Notational conventions used in the operating instructions
1 Information about these operatiing instruction
SENCORE S8100 CUT-OFF SAW MANUAL 5
To Next Page
Loading...