•Beawareofhiddenhazards,suchaselectricalcables,waterorgaspipesandammablesubstancesinthe
area to be cut!
• When cutting pre-tensioned and steel-reinforced concrete pillars, observe all instructions and standards
that the respective authorities or component manufacturers have stipulated. Cutting of reinforcement bars
must be performed in the prescribed order and under consideration of the relevant safety provisions.
• Never operate this power tool when you are fatigued or exhausted. Tiredness and exhaustion may result in
loss of control. Be alert – if you get tired or exhausted while operating your power tool, take a break. Working
with the power tool can be strenuous. If you have any condition that might be aggravated by strenuous work,
check with your doctor before operating this power tool.
• Never cut or disturb asbestos, asbestos-containing materials or any other known hazardous materials.
•Beawareofhiddenhazards,suchaselectricalcables,waterorgaspipesandammablesubstancesinthe
area to be cut!
• When cutting pre-tensioned and steel-reinforced concrete pillars, observe all instructions and standards
that the respective authorities or component manufacturers have stipulated. Cutting of reinforcement bars
must be performed in the prescribed order and under consideration of the relevant safety provisions.
• Never alter, change or modify any safety equipment or functional assemblies of this power tool.
• Prevent accidents! Only use this power tool if it is in good, safe condition! Always check the power tool prior to use.
• Only use those accessories and attachments that have been supplied and approved for attachment to this
power tool by us. Only cut off wheels approved for this power tool must be used as cutting tools.
• Reliable operation and safety of this power tool also depend on the quality of the spare parts used. Use
only genuine spare parts. Original spare parts are identical with original production parts and guarantee
the best quality in material, dimensions, function and safety. Original parts and accessories are available
from your dealer. Your dealer has been supplied with appropriate documentation to determine the correct
parts. Your dealer is frequently supplied with updates about improvements to the equipment. Please note
that the use of non-original parts will void your warranty.
• Always store the power tool in a safe place and in such a way that it will not pose any danger. Stop the engine.
Never let the power tool run unsupervised!
Persons who disregard safety instructions, operating or maintenance instructions are liable for any damage or
consequential losses.
3.3 Personal Protective Equipment (PPE)
In order to prevent injuries, please make sure that you wear the prescribed clothing and protective equipment.
Clothesshouldbetight-tting(notloose),butnothindering.Whenperforminganywork,wearaworkingsuit
ofrmmaterialswithsufcientameinhibitionthatcannotignitebyyingsparks(materialsofleather,cotton
afterame-inhibitingtreatmentorheavyclose-meshedlinenfabrics).Checktheinformationintheworkclothes
andensurethatnon-ammablematerialsandnosyntheticmaterialslikepolyesterornylonarecontainedinthe
clothes.Theworkingclothesmustneverbecontaminatedwithammablesubstancessuchasgasolineorsimilar
products.Do not wear scarves, ties, jewelry or other clothes that may get caught in the cut off wheel, objects in
the environment, or the power tool. Tie back long hair and secure it under a hard hat.
Wear a protective hard hat during any work. Use personal hearing protection. Eye and face protection is
mandatory pursuant to ANSI Z 87.1.
Wear protective gloves with non-slip palms.
When wet cutting is not utilized, the operator and bystanders should always wear breathing protection equipment
approved by NIOSH/MSHA for the material being cut.
Wearrmsafetyshoeswithsteeltoesandagoodgrip
8 SENCORE S8100 CUT-OFF SAW MANUAL
To Next Page
Loading...
General