Sennheiser XS WIRELESS 2 - Back

EM-XSW 1 rack receiver
29
Back
5 XLR-3 socket for Balanced audio output
• See „Outputting audio signals“
6 6.3 mm jack socket for Unbalanced audio output
• See „Outputting audio signals“
7 Line/Mic switch for selecting the signal type
• See „Setting options on the rear of the device“
• See „Outputting audio signals“
8 SQ control knob for adjusting the squelch value
• See „Setting options on the rear of the device“
9 Power connection socket for the power supply unit
• See „Connecting/disconnecting the receiver to/from the
power supply system“
10Strain relief for the connection cable of the power supply
unit
• See „Connecting/disconnecting the receiver to/from the
power supply system“