Sennheiser XS WIRELESS 2 - Connecting;Disconnecting the Receiver To; from the Power Supply System

EM-XSW 1 DUAL rack receiver
43
Connecting/disconnecting the receiver to/
from the power supply system
Only use the supplied power supply unit. It is designed for your
receiver and ensures safe operation.
To connect the receiver to the power supply system:
▷ Pass the cable of the power supply unit through the strain
relief.
▷ Insert the plug of the power supply unit into the Power
socket on the receiver.
▷ Slide the supplied country adapter onto the power supply
unit.
▷ Plug the power supply unit into the wall socket.
To completely disconnect the receiver from the power supply
system:
▷ Unplug the power supply unit from the wall socket.
▷ Unplug the power supply unit from the Power socket on the
receiver.