EM-XSW 2 rack receiver
73
Configuring a multi-channel system
Please note when creating multi-channel systems:
Only the factory-preset transmission frequencies within one
frequency bank are intermodulation-free.
▷ Set the same channel bank for all receivers.
▷ Assign one channel from this channel bank to each receiv-
er.
We recommend using the SCAN function, as this is the most
reliable way to identify free frequencies (see „SCAN menu
item“).
If you know free frequencies in your area, you can also set the
frequency manually (see „PRESET menu item“ and „TUNE
menu item“).
To Next Page
Loading...
