Sennheiser XS WIRELESS 2 - EM-XSW 1 DUAL Rack Receiver; Connectors and Controls; Front

EM-XSW 1 DUAL rack receiver
41
EM-XSW 1 DUAL rack receiver
Connectors and controls
The EM-XSW 1 DUAL two-channel receiver is essentially two
individual EM-XSW 1 receivers in one housing.
Each of the two receiver channels has separate connectors
and setting options.
Front
1 Display for status information
• For each of the two channels
• See „Information on the receiver’s display“
2 Control buttons for selecting channels and adjusting vol-
ume
• For each of the two channels
• See „Setting options on the front of the device“
3 SYNC button for synchronizing the transmitter and receiver
• For each of the two channels
• See „Establishing a radio link | Synchronizing the receiver
and transmitter“
4 ON/OFF button for switching the device on and off
• See „Switching the receiver on and off“