Sennheiser XS WIRELESS 2 - Inserting and Removing the Batteries

SK-XSW bodypack transmitter
82
7 SYNC button
• See „Establishing a radio link | Synchronizing the receiver
and transmitter“
8 Sensitivity switch
• See „Setting the input sensitivity“
Inserting and removing the batteries
You need two AA 1.5 V batteries to operate the handheld
transmitter.
▷ Press the two catches and open the battery compartment
cover.
▷ Insert the batteries as shown in the figure. Observe correct
polarity.
▷ Close the battery compartment.
The cover locks into place with an audible click.