EM-XSW 1 rack receiver
37
▷ Press the CH+/CH- buttons to select a frequency bank (1 to
8).
►
▷ Press the SET/SCAN button to accept the selected fre-
quency bank.
▷ Press the CH+/CH- buttons to select a channel (0 to 9) in
the selected frequency bank.
The selected bank and channel are shown in the display
(e.g. bank 2, channel 3).
►
►
▷ Press the SET/SCAN button to accept the selected chan-
nel.
If you have set a new frequency, you must still syn-
chronize the receiver with the transmitter to es-
tablish the radio link (see „Establishing a radio link
| Synchronizing the receiver and transmitter“).
To Next Page
Loading...
