Sensorex TX3000 - Function Key Description

PRODUCT INSTRUCTION MANUAL
Page 7 of 29
Part 5 Conguration (cont.)
5.2 Function Keys:
Setup
In the parameter set-up mode, pressing this key allows you to exit parameter set-up mode
and go back to Measurement mode.
Cal.
In the Calibration mode, pressing this key allows you exit Calibration mode and back to Mea-
surement mode.
Mode
In the parameter set-up mode and Calibration mode, press this key to increase the value or to
scroll to other function.
In the parameter set-up mode and Calibration mode, press this key to decrease the value or to
scroll to other function.
Enter
Key for conrmation; pressing this key is essential when modifying data value or selecting the
parameter setting items in the window.
Setup
CALIBRATION MODE
In the Measurement mode, pressing these two keys simultaneously allows you
to enter Calibration mode.
+
Mode
Mode
Cal.
FUNCTION SET-UP MODE
In the Measurement mode, pressing these two keys simultaneously allows you
to enter parameter set-up mode.
+
Form: INSTRTX3000-Rev A