Thank you for choosing the TX3000 pH/mV transmitter. This transmitter is a user-friendly microprocessor based trans-
mitter for pH and mV measurement. As with all electronic instruments, it is essential to follow all directions for optimal
performance. In particular, you must properly install, use and maintain the TX3000 to ensure that it will continue to
operate within its specications.
• Follow all warnings, cautions and instructions marked on and supplied with the transmitter. Please contact Sensorex
with any product questions or concerns.
• Install the transmitter as specied in this manual, following all applicable local and national codes.
• Do not attempt to repair your TX3000 transmitter or use any replacement parts from any other supplier.
• If you nd any errors in this manual, please report them to Sensorex.
• Please complete the WARRANTY REGISTRATION located at the back of this manual and fax or e-mail to Sensorex at
fax: 714-894-4839, e-mail: support@sensorex.com
TX3000 pH/mV Transmitter ESSENTIAL INSTRUCTIONS
READ THIS BEFORE USING YOUR TX3000 pH/mV TRANSMITTER!
About This Document
This manual contains instructions for the installation, operation and care of the TX3000 pH/mV transmitter.
The following list provides notes concerning revisions of this document.
Rev Level Date Notes
A 9/2012 1st revision of manual.
Form: INSTRTX3000-Rev A
PRODUCT INSTRUCTION MANUAL
To Next Page
Loading...
