METIS M308 / M309 / M313 / M316 / M318 / M323 / H309 / H316 / H318 (12-pin)
Content
2
Content
1 General ............................................................................................................................................... 4
1.1 Information to this Manual ......................................................................................................... 4
1.2 CE Conformity and Standards .................................................................................................. 4
1.3 Limitation of Liability .................................................................................................................. 4
1.3.1 Devices with PID controller .................................................................................................. 4
1.4 Terms of Warranty .................................................................................................................... 4
1.5 Copyright ................................................................................................................................... 5
1.6 Explanation of Symbols ............................................................................................................ 5
1.7 Customer Service / Spare Parts ............................................................................................... 5
1.8 Disposal .................................................................................................................................... 5
2 Safety .................................................................................................................................................. 6
2.1 General ..................................................................................................................................... 6
2.2 Electrical Connection ................................................................................................................ 6
2.3 Laser Targeting Light ................................................................................................................ 6
2.4 Through-lens Sighting / View Finder ......................................................................................... 6
2.5 Device Labels............................................................................................................................ 6
2.6 Responsibility of the Operators ................................................................................................. 6
3 Overview ............................................................................................................................................ 7
3.1 Intended Use ............................................................................................................................. 7
3.2 Scope of Delivery ...................................................................................................................... 7
3.3 Model Designs .......................................................................................................................... 7
4 Electrical Connection........................................................................................................................ 8
4.1 Cable Colors and Pin Assignment (14-wire connection cables) ............................................... 8
4.1.1 Factory Settings ................................................................................................................... 9
4.1.2 Power Supply ....................................................................................................................... 9
4.1.3 Analog Output 1 and 2 ....................................................................................................... 10
4.1.4 Configurable Inputs / Outputs ............................................................................................ 10
4.1.5 Serial Interface RS232 / RS485 (M3: switchable RS232 / RS485; H3: only RS485) ........ 11
4.1.5.1 Interface Converter (Accessory) ................................................................................... 12
4.1.6 Shielding ............................................................................................................................ 12
4.1.7 Camera Module ................................................................................................................. 12
4.2 Devices with additional Profibus-DP or Profinet connection ................................................... 13
4.2.1 Pin assignment Profibus-DP .............................................................................................. 13
4.2.2 Pin assignment Profinet ..................................................................................................... 13
5 Mechanical Installation ................................................................................................................... 14
5.1 Mounting ................................................................................................................................. 14
5.2 Mounting Optical Fiber / Optics (only devices with optical fiber) ............................................ 14
5.2.1 Bending Radius Optical Fiber ............................................................................................ 14
5.2.2 Winding and Unwinding the Optical Fiber ......................................................................... 14
5.2.3 Mounting of Optical Fiber ................................................................................................... 14
5.2.4 Connect the Optics ............................................................................................................ 15
5.3 Ambient Temperature ............................................................................................................. 15
5.4 Alignment onto the Measuring Object ..................................................................................... 16
5.4.1 Alignment with the Laser Targeting Light .......................................................................... 16
5.4.2 Alignment with the Through Lens Sighting / View Finder .................................................. 17
5.4.3 Alignment with the Camera Module (only M3) ................................................................... 17
5.5 Setting the Measuring / Focus Distance ................................................................................. 18
5.5.1 Manually Focusable Optics ................................................................................................ 18
5.5.2 Motorized Focus Optics (only M3) ..................................................................................... 18
5.5.3 Manually Focusable Fiber Optic Lenses............................................................................ 18
5.5.4 Fixed Focus Optics (only M3) ............................................................................................ 18
5.6 Spot Size Tables ..................................................................................................................... 19
5.6.1 Manually Adjusted or Motorized Focus Optics with laser targeting light or view finder ..... 19
5.6.2 Manually Adjustable or Motorized Focus Optics with camera module .............................. 20
5.6.3 Manually Adjustable or Motorized Focus Optics Model M313 .......................................... 20
5.6.4 Manually Adjusted or Motorized Focus Optics Model M323 ............................................. 21