2–6 Sensus Metering Systems
Chapter 2: Collect Meter Data
The system displays the Reading Management screen.
Reading Management Screen 4 Use the PgUp/PgDn key to highlight the parameter that
you would like to change on the Reading Management
screen.
5 Press the Enter key to toggle the selected setting.
6 Repeat step 4 and step 5 as needed to configure the
system to your preferences.
7 Press the Esc key when you finish setting your preferences
on the Reading Management screen.
The system returns to the Configuration menu.
8 Press the Esc key again to exit the Configuration menu.
Note
Each of the parameters on the Reading
Management screen has a choice of two
settings. Use the Enter key to toggle between
the two settings for the highlighted parameter.
To Next Page
Loading...