Warranty
The manufacturer warrants to the initial purchaser that each new component of the LuMon System will be
free from defects in wor
its own choice repair or replace any component for which the manufacturer acknowledges the warranty cover
with a replacement component.
Warranty exclusions and system performance
Sentec AG can neither guarantee or verify instrument performance characteristics nor accept warranty claims
or product liability claims if the recommended procedures are not carried out, if the product has been subject
to misuse, neglect or accident, if the product has been damaged by extraneous causes, if accessories other than
those recommended by Sentec AG are used, if the warranty seal on the lower side of the monitor is broken, or if
instrument repairs are not carried out by
Sentec Authorized LuMon Technicians
.
Design/patents related to the LuMon System: Please refer to the specification sheets for the LuMon
System: www.Sentec.com/education/eit/plpm-eit
Trademarks: Sentec , Advancing Noninvasive Patient Monitoring , LuMon and Sentec EIT are trademarks
of Sentec AG.
Terms of use of software components: Sentec devices that use software may use Sentec, third party and/or
open-source software, depending on their setup. Sentec, third party and/or open-source software may be
subject to different terms of license. Respective information regarding Sentec, third party and/or open-source
software used in the LuMon System is available at the following web page: https://www.Sentec.com/licenses
© 2020 Sentec AG: The contents of this may not be reproduced in any form or communicated to
any third party without the prior written consent of Sentec AG.
While every effort is made to ensure the correctness of the information provided in this , Sentec
AG assumes no responsibility for errors or omissions. This is subject to change without notice.
Any serious incident that has occurred in relation to the device shall be reported to the manufacturer and the
competent authority of the Member State in which the user is established.
To Next Page
Loading...
