Always read the instructions supplied with the accessory for operating
instructions and safety information.
Belt clip
The belt clip is used to attach your radio to clothing or to a belt. The clip is
fitted to the carrying aid attachment recess on the back of your radio.
Caution: Damage to product. Always remove the battery before fitting or
removing the clip.
Fit the belt clip
1. Remove the battery.
2. Slide the stud into the carrying aid attachment recess.
3. Slide until it clicks into place.
Remove the belt clip
1. Remove the battery.
2. Lift the clip.
User Guide
141
To Next Page
Loading...
