Sepura SC20 series User Manual

LED indicators
Blue LED
The blue LED indicates either a missed event, such as a missed call or unread
message, or your Bluetooth
®
status (if enabled). A notification alerting you to
the missed call, Callout or unread message appears in the Shortcut Bar. See
Notifications on page 27.
LED Indication Description
Flashing on for 1 second,
off for one second, on for
another second, then off for
seven seconds
Missed event
One flash every 10s Bluetooth
®
function is enabled
Continuous rapid flashing
radio is in Bluetooth
®
discoverable (visible)
mode
Tri-colour LED
The tri-colour LED indicates the operational state of the radio.
LED Colour Description
Solid green Radio is powering on or in a call and receiving
Solid red Radio is in a call and transmitting
Intermittent
flashing red
Attempting to connect to the network or incoming
telephone SDS/Status message or battery low
warning
Flashing orange Incoming telephone call or SDS/Status message
Intermittent four
flashes orange
Transmit Inhibit mode or Fallback mode are active
Emergency button
The red/orange button on your radio is typically programmed to activate an
Alarm Call. See Emergency operation on page 33.
Press and hold (2 seconds) the Emergency button to initiate an Alarm Call.
If the radio is powered off, press and hold (3 seconds) to power on and
initiate an Alarm Call. It may take several seconds for the radio to complete its
power on process before initiating the Alarm call.
User Guide
19

Sepura SC20 series Specifications

General

Operating Temperature	-30°C to +60°C
Frequency Bands	380-430 MHz
GPS	Integrated GPS, GLONASS
Bluetooth	Bluetooth 4.0
Security	TEA1, TEA2, TEA3
Transmit Power	1W, 3W, 10W
Battery Life	Up to 14 hours (standard battery)