Sepura SC21 Series User Manual

WAP
Your radio may be configured to browse WAP websites. The browser options are customised using
Radio Manager.
Starting the WAP browser
To open activate the WAP browser:
press the Up navigation key (or Shortcut) to open the Shortcut Bar, then select WAP
Homepage OR
select the WAP option from the Applications menu OR
press a programmed soft key [customisable] OR
open a WAPURL contained within a received SDSmessage (or your radio may be
customised to open the WAP URLautomatically). Open a URL in a message on page71
Using WAP
Exiting the browser
Exit at any time by pressing Back or the Cancel/Home key (if customised).
Navigation
Press the Left navigation key to display the previous screen/page and the Right navigation key to
display the next screen/page.
Entering text
If customised, your radio supports the entering of text to specify a URL and entering of data into a
form, and so on. See Text entry on page66.
Saving check box or radio button selections
Sometimes you may need to select an option which has a check box or radio button. When setting an
option that uses a check box or radio button, toggle the left context key to select the appropriate
option (radio button or check box). To save the selection either scroll to the bottom of the screen and
highlight the Save button or press the Left context key (either a tick icon or labelled Save depending
on customisation).
Browser menu
Home Page
Select to activate the WAP browser and display the browser's homepage contents. If customised,
you can change the Home Page (Settings > Settings > Homepage).
User Guide 97

Sepura SC21 Series Specifications

General

IP Rating	IP54
Operating Temperature	-20°C to +55°C
Channel Spacing	25 kHz
Ingress Protection	IP54
Channels	Up to 2000
Frequency Bands	380-430 MHz, 806-870 MHz
Battery Life	Up to 14 hours
RF Power Output	1W
TETRA Air Interface	ETSI EN 300 392-2