Sepura SC21 Series User Manual

Fitting an accessory
Fitting an accessory to the sRAC
1. Secure the accessory by rotating the screw clockwise.
Fitting an accessory to the sDAC
1. Connect the cable to the radio by inserting the hook on the connector into the slot as shown.
2. Secure the accessory in position by pushing down and rotating the screw clockwise 90°. Do
not over tighten.
124 SC21 Series hand-portable radio

Sepura SC21 Series Specifications

General

IP Rating	IP54
Operating Temperature	-20°C to +55°C
Channel Spacing	25 kHz
Ingress Protection	IP54
Channels	Up to 2000
Frequency Bands	380-430 MHz, 806-870 MHz
Battery Life	Up to 14 hours
RF Power Output	1W
TETRA Air Interface	ETSI EN 300 392-2